Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Tail light bulb

Today, you will learn how to remove and replace the rear headlamp bulbs on a second series Fiat Punto. First, open and lift the boot lid and move the carpet lining to access the rear screw of the lamp and remove it: also take off the plastic cover found at the top and unscrew the rear nut of the lamp. At this point, you can remove the lamp from the outside by disconnecting the electrical connector of the bulbs; then, remove the light unit along with all the bulbs and twist them out, as shown in the video: replace and refit everything!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to replace the rear headlamp bulbs on a Fiat Grande Punto in a few simple steps. First, open the boot and unscre…
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos