Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Fiat Punto 3

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light bulb

Replacing the rear headlight bulb of the Fiat Punto MK3 model is a simple and quick operation to carry out independently. To replace the bulbs, we need to open the trunk and unscrew the side screws that hold the headlight in place. After removing the screws, we release the headlight from its position by disconnecting the connector. Remove the dome light cover and replace the affected bulbs. Insert the new bulb and close the dome light cover. Connect the connector to the headlight and screw in the locking screws. Close the trunk and test the light function.

Posted on 11 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to replace the rear headlamp bulbs on a Fiat Grande Punto in a few simple steps. First, open the boot and unscre…
How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short guide, we will see the instructions that will allow us to disassemble and replace the glow plugs of the Fiat Punto Evo and Grande Punto…
How to disassemble and replace the external rearview mirror of the Fiat Punto Evo
How to disassemble and replace the external rearview mirror of the Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The information shown in this guide will show us the process of disassembling and replacing the external rearview mirror of the Fiat Punto Evo. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos