Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Coolant in the Fiat Grande Punto 1.3 Multijet

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antifreeze coolant

See other generations:
Video tutorial

Today, we will learn how to replace the coolant in the Fiat Punto. First, open the bonnet of your car and start disconnecting the hose from the coolant reservoir; then disconnect the radiator hose and let the fluid drain into a container for about ten minutes, as shown in the video.

At this point, if necessary, also remove the coolant reservoir; then proceed to top up with new coolant, filling to the maximum level mark!


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Remove the Coolant Reservoir Cap for Topping Up on a Fiat Grande Punto 1.3 MultiJet
How to Remove the Coolant Reservoir Cap for Topping Up on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief guide, you will learn how to remove the coolant reservoir cap and top up on a Fiat Grande Punto 1.3 MultiJet in simple and quick steps.…
How to Replace the Coolant on Fiat Grande Punto
How to Replace the Coolant on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Here’s how to replace the radiator coolant on a Fiat Grande Punto. Using a socket wrench, disconnect the radiator hose at the bottom (let the rusty l…
How to Change the Thermostat on the Fiat Grande Punto 1.4
How to Change the Thermostat on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, discover the main instructions for removing and replacing the coolant thermostat on the Fiat Grande Punto 1.4 petrol. First, open the …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos