Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Fiat Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light bulb

To replace the rear light bulb on the Fiat Punto, open the tailgate to access the screws securing the rear light in its housing. After loosening these screws, you can pull the light out of its position, disconnecting the connector at the back. At this point, you can also remove the bulb inside, replacing it with a new spare part; after the replacement, remount the light, securing it with the appropriate fixing screws.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Fiat Punto?
How to Replace the Front Headlight Bulb on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front headlight bulb on a Fiat Punto, open the bonnet to access the engine bay. You will need to remove the protective cover from the …
How to Replace the Front Headlamp Bulb on a Fiat Punto
How to Replace the Front Headlamp Bulb on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the front headlamp bulb on a Fiat Punto, access the rear of the headlamp by opening the bonnet and entering the engine compartment. Here, …
How to Install H4 LED Bulbs on the Fiat Grande Punto
How to Install H4 LED Bulbs on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To install an H4 LED bulb (dipped and main beam) on a Fiat Grande Punto, start by removing the rubber cap at the back of the headlamp, disconnect the…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos