Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light from a Fiat Punto

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Tail light

Do you want to replace the rear light on a Fiat Punto? Let's see how to proceed with the removal. First, open the boot and remove the inspection cover located at the top of the seatbelt with a lever. Remove the boot lining. Use a socket spanner to undo the securing bolts of the light, and with a plastic lever, help to pull out the rear light. Replace the rear light with a new one. After replacing the worn bulbs, prepare to refit the light with its components. Finally, test the correct operation of the lights.

Updated on 15 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Rear Light on a Fiat Punto
Removing the Rear Light on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the rear light on a Fiat Punto? Let's see how to do it. Open the boot lid and remove the fabric cover located at the bottom side. Undo …
Removing the Rear Headlight on a Fiat Punto
Removing the Rear Headlight on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Want to replace the rear headlight on your Fiat Punto? Here's how to proceed with the removal. Open the boot and remove the inspection cap located at…
Replacing the Rear Headlight on a Fiat Grande Punto
Replacing the Rear Headlight on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to replace the damaged rear headlight on a Fiat Grande Punto? Let's see how to disassemble the headlight. Lift the rear hatch of the car,…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos