Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

After a few months, the wiper blades need to be replaced as the rubber hardens too much, failing to clean the windscreen properly. On the Fiat Punto, this operation is very simple as shown in the attached video.

Once you have the correctly sized blades, extend the wiper arm and, using a flathead screwdriver, disengage the plastic block. Then insert the new blade and ensure that the pin is securely attached to the arm. Close any cover for the blade, depending on the chosen model, and return the wiper arm to its position.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Replacing the Wiper Motor on Fiat Punto
Replacing the Wiper Motor on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this guide, learn how to replace the wiper motor on a Fiat Punto. Pull the plastic lever located at the bottom left of the dashboard, lift the eng…
Windscreen Wiper Motor Replacement on Fiat Punto
Windscreen Wiper Motor Replacement on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Is your windscreen wiper not functioning as it should? Follow this guide to remove the wiper motor from a Fiat Punto. Pull the plastic lever located …
How to Replace the Front Windscreen Wiper Blades on a Fiat Grande Punto
How to Replace the Front Windscreen Wiper Blades on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Remove the front wiper blade by hand, gently pulling the movable blade without breaking it, and slide it off the arm on the left. Fit the new blade o…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos