|
Do it yourself
| |||
| ||||
How to reset the service on the Fiat Punto
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
After servicing the car and then replacing the oil and the oil filter, it will be necessary to reset the service warning light that has come on on the control panel, to do this you must follow the procedure below : â € “Switch on the ignition without starting the engine; - press the accelerator all the way down and keep it pressed; - With the left foot press the brake 7 times and at the 7th pressure, keep at the end of the stroke for 60 seconds; - Release the brake pedal and then the accelerator pedal and switch off the ignition; â € “Wait 60 seconds before turning the ignition back on.
Posted on 4 May 2022 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
In order to reset the Fiat Punto's Service warning light, it is necessary to use a diagnostic tool, as there is no procedure that can be carried out …
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
In order to reset the Fiat Grande Punto Service warning light it is necessary to use a diagnostic tool: it is in fact impossible to reset the warning…
Fiat Punto
(2005-2018 /
199, MK 3, Punto EVO, Grandepunto )
In order to reset the Fiat Grande Punto Oil Service warning light, insert the ignition key inside its lock so that it can be turned and the instrumen…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Headlight Bulbs on a Mercedes C-Class
Let's see how to replace the headlight bulbs on a Mercedes C-Class. Open the hood by pulling the lever located at the bottom right of the dashboard and secure it with the prop rod. Locate the inspection cap of the headlight (located at the back of the headlight) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holder out of the headlight and extract the damaged bulbs using a screwdriver or needle-nose pliers. Install the new bulbs (always the correct type and size) and insert the bulb holder back into the headlight. Reassemble all the parts removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.183
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
