Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator Belt of the Fiat Linea

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: V-belt

This video is currently unavailable

This brief and simple guide shows how to remove and replace the alternator belt or serpentine belt of the Fiat Linea, following the instructions below. First, open the hood and start loosening the belt tensioner using a socket or star wrench; then, remove the old belt from the various pulleys, as shown in the video.

Now, install the new alternator belt, routing it correctly between the pulleys, loosen the tensioner, and then return it to its position!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Wiper Motor on a Fiat Linea?
How to Replace the Windshield Wiper Motor on a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To replace the windshield wiper motor on a Fiat Linea, open the hood to access the bolts securing the grille at the base of the windshield. Once the …
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Fiat Linea (2007-2018 / MK 1) In this guide, we will see the main instructions on how to disassemble and replace the starter motor of the Fiat Linea 1.3 MultiJet. First, let's ope…
How to Replace the Cabin Air Filter in a Fiat Linea?
How to Replace the Cabin Air Filter in a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) In the Fiat Linea, the cabin air filter is located directly behind the glove compartment, protected and contained in a specific box. Before replacing…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos