Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Fiat Cronos interior ceiling light

Model: Fiat Cronos X6S, 358s - Years 2018-2026
Part: Interior dome light bulb

Let's see in this guide how to remove and replace the internal light bulb of the Fiat Cronos passenger compartment, following the instructions below. First of all we get on board the car and start removing the internal ceiling light; to do this we use a thin plastic lever. At this point we disconnect the electrical connector of the bulbs and remove the old bulb bulbs from the ceiling light; then replace them with the new ones, of the right type, inserting them in the correct direction. We just have to reassemble everything, applying the reverse procedure!

Posted on 11 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Cronos?
How do you reset the Service light on the Fiat Cronos?
Fiat Cronos (2018-2026 / X6S, 358s) In order to reset the Service light on the Fiat Cronos, you need to connect a diagnostic tool to the OBD port of the vehicle, located on the dashboar…
How to Replace the Key/Remote Battery for the Fiat Cronos
How to Replace the Key/Remote Battery for the Fiat Cronos
Fiat Cronos (2018-2026 / X6S, 358s) The tutorial video we are about to observe is applicable to multiple cars, including the Fiat Cronos, Fiat Argo, etc. It is quite easy to realize tha…
How do you reset the Service light on the Fiat Cronos?
How do you reset the Service light on the Fiat Cronos?
Fiat Cronos (2018-2026 / X6S, 358s) To reset the Service light of the Fiat Cronos, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: on…

How to Open the Bonnet of a BMW 1

Maintenance on a BMW 1? How do you open the front bonnet? This is a simple operation, let's see how to do it. Pull the lever located at the bottom left of the dashboard, then slightly lift the bonnet and pull the release lever. Lift the front bonnet and secure it with the prop rod. Top up the oil, coolant, and screenwash. To close the bonnet, remove the safety rod and let the bonnet drop down from a minimal height. Close the front bonnet and ensure it is properly secured to avoid issues while driving.

Watch the video!


by ScegliAuto

More videos