Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Discs on the Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Brake rotors

See other generations:
Video tutorial

This guide outlines the steps to remove and replace the front brake discs on the Fiat Punto Evo, as well as the Grande Punto. First, lift the vehicle and start by removing the front wheel; then unscrew the bolts securing the brake caliper, removing it along with the disc and pads, as shown in the video.

At this point, disconnect the wear sensor for the pads and unscrew the bolts of the brake disc; remove it and replace it with the new one, subsequently installing the new pads by applying the reverse procedure!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Fiat Punto
How to Replace the Front Brake Pads on the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video outlines the steps to remove and replace the front brake pads on the Fiat Punto Evo, as well as the Grande Punto. First, lift the vehicle …
How to Replace the Rear Brake Discs and Pads of the Fiat Punto Evo
How to Replace the Rear Brake Discs and Pads of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below are the instructions for removing and replacing the rear brake pads and disc of the Fiat Punto Evo, as well as the Grande Punto. First, lift th…
How to Change the Front Brake Pads on the Fiat Grande Punto
How to Change the Front Brake Pads on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, discover the steps to remove and replace the front brake pads on the Fiat Grande Punto, as well as the Punto Evo. First, lift the vehicle and …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos