Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Front bumper

In this tutorial, you will see how to remove the front bumper on a Fiat 500, a very simple operation. Start by opening the bonnet, then unscrew the upper and lower fixing screws. Next, move to the wheel arch where you will remove the access panels for the bulbs and unscrew the additional screws, removing the two wheels if necessary to make the job easier. Once done, disconnect the fog light connectors, grab the bumper from one side, and pull it outwards to disengage it from the frame. To fit the replacement, follow the reverse procedure.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) In today's video, you will see the main instructions on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing al…
Fitting Front Bumper on Fiat 500
Fitting Front Bumper on Fiat 500
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will learn how to fit the front bumper of a Fiat 500. After purchasing the new bumper or previously removing the old one …
Removing the Plastics from the Bumper of the Fiat 500
Removing the Plastics from the Bumper of the Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the front bumper of the Fiat 500 to replace it or to take off the parts. Lift the bonnet and secure it, raise the car on a jack to acce…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos