Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How do you remove the front bumper of the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Front bumper
Operation: How do you remove the front bumper of the Fiat 500?

In order to remove the front bumper of the Fiat 500 you have to loosen the screws that secure it to its housing. These screws are located in the lower part of the bumper, in the inner part of the wheel arches and in the front part of the engine compartment. When all these screws have been loosened, it will be possible to detach the bumper, also disconnecting the connectors that are inside it. This way the old bumper will be completely removed and the new spare part can be installed. This can be fixed to its seat by means of the previously removed bolts.


Posted on 15 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos