Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Front bumper

How to remove the front bumper of a Fiat 500? Let's see in this video how to proceed: lift the engine bonnet and secure it. Using a battery-powered screwdriver, unscrew the securing pins located at the top of the bumper (as shown in the video). Once the screws at the top are unscrewed, unscrew the splash guard pins and finally remove the pins located at the bottom of the bumper. Remove the bumper from the vehicle body using your hands. To proceed with the installation: secure the bumper to the vehicle body with your hands and then tighten all the screws around the splash guard and the perimeter of the bumper.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Front Bumper on Fiat 500
Fitting Front Bumper on Fiat 500
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will learn how to fit the front bumper of a Fiat 500. After purchasing the new bumper or previously removing the old one …
How to Remove the Front Bumper of the Fiat 500 ABARTH
How to Remove the Front Bumper of the Fiat 500 ABARTH
Fiat 500 (2007-2024 / 312) Today, you will learn the steps to remove the front bumper of the Fiat 500 Abarth easily and quickly, without damaging the internal plastic supports.…
How to Remove the Front Bumper on the Fiat 500?
How to Remove the Front Bumper on the Fiat 500?
Fiat 500 (2007-2022 / ) In this tutorial, see how to remove the front bumper on the Fiat 500, a very simple and quick operation. First, lift the front of the vehicle, taking…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos