Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Fiat 500 front bumper assembly

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Front bumper
Operation: Fiat 500 front bumper assembly

In this video tutorial we will see how to assemble the front bumper of a Fiat 500. After purchasing the new bumper or previously dismantled the old one to replace other parts, let's see how to reassemble it! Let's take our bumper and put it in position: let's start by screwing the upper screws in order to keep it raised; then we go to fit it from the side parts by making slight pressure. At this point we are going to mount the fender with all the screws that support the bumper. Follow the rest of the video for more tips!


Posted on 15 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos