Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Rear Bumper on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Front bumper

How do you fit the rear bumper on a Fiat 500? Let’s see how to proceed; this operation is not too complex. First: take the bumper and position it perfectly on the vehicle body, then, using a socket, tighten the securing bolts at the front of the bumper. Next, start tightening the bolts around the wheel arch liners of the car. After securing the bolts around the bumper, tighten the bolts at the bottom of the vehicle, between the chassis and the bumper (use appropriate mounting tools). Finally, check the correct fitting of the bumper in all its parts.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting Front Bumper on Fiat 500
Fitting Front Bumper on Fiat 500
Fiat 500 (2012-2023 / 500 L) In this video tutorial, you will learn how to fit the front bumper of a Fiat 500. After purchasing the new bumper or previously removing the old one …
How to Remove the Rear Bumper on a Fiat 500?
How to Remove the Rear Bumper on a Fiat 500?
Fiat 500 (2007-2022 / 312) In this tutorial, you will learn how to replace the rear bumper of a Fiat 500. First, open the boot, then remove the fixing screws of both rear light…
How to Remove the Rear Bumper in a Fiat 500L
How to Remove the Rear Bumper in a Fiat 500L
Fiat 500 (2012-2023 / 500 L) Before you start, open the boot of your Fiat 500L. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located ar…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos