Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the rear bumper of a Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Rear bumper
Operation: How to remove the rear bumper of a Fiat 500

Let's start by removing the six screws located inside the rear wheel arches of our Fiat 500. After that, we will have to open the tailgate of the boot, reaching the screws that secure the rear lights, which we will have to unscrew and remove. Once we have released the taillights, we will have to extract them from their place. At this point, we will have discovered all the screws and all the bolts that secure the bumper, which we will have to unscrew and remove. When we have completed this step, we will be able to remove the rear bumper, and we will have finished the disassembly.


Posted on 7 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos