Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you remove the front bumper of the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Front bumper
Operation: How do you remove the front bumper of the Fiat 500?

In order to remove the front bumper of the Fiat 500 you have to open the hood so that the screws located in the upper part of the piece can be unscrewed, accessible only by opening the hood. Once the screws have been removed, it will be possible to go and unscrew the ones located in the wheel arches of the front wheels and in the lower part of the bumper. When all the screws have been loosened, it will be possible to go and detach the connectors connected internally, so that the bumper can be completely removed from its housing and replaced with a new one.


Posted on 9 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos