Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove bumpers on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 Epoca - Years 1957-1975
Part: Front bumper
Operation: How to remove bumpers on Fiat 500

Do we want to remove the front bumper of a Fiat 500? Let's see how the front bumper is removed to carry out maintenance on the inside. We lift the bonnet and put it in safety, we unscrew the locking pins placed in the upper part of the bumper. Once you have unscrewed the screws in the upper part, unscrew the pins of the stone guards and finally remove the pins located in the lower part of the bumper. We remove the bumper from the car body by hand. We carry out maintenance on the inside of the parts or we assemble operating parts (such as horns, trays, etc.). At the end of the maintenance we fix the piece on the car body and proceed to tighten all the screws both around the stone guard and around the whole bumper.


Posted on 24 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos