Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear shock absorbers of the Fiat Seicento?

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Shocks

In order to replace the rear shock absorbers of the Fiat Seicento, you have to go and lift the car with a jack so that the rear wheels do not touch the ground. At this point, you will be able to access the lower part of the car by loosening the bolts that secure the shock absorber: these will be located in the lower and upper part of the piece. Once these bolts have been loosened, you can remove the shock absorber and repeat the operation on the other side as well. Once the old shock absorbers have been removed, the new replacement parts can be installed.

Posted on 17 August 2022 by ScegliAuto

Video tutorial

Related tutorials
…
How to replace the drums and brake shoes of the rear brakes on the Fiat Seicento.
How to replace the drums and brake shoes of the rear brakes on the Fiat Seicento.
Fiat Seicento (1998-2010 / MK 1) In this guide, we will discover the procedure for disassembling and replacing the drum and rear brake shoes of the Fiat Seicento. First, we raise the…
Replacement of the rear brake shoes of the Fiat Seicento
Replacement of the rear brake shoes of the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Today we will see, in this video tutorial, how to disassemble and replace the rear brake shoes of a Fiat Seicento, in simple and quick steps. First w…

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos