Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Shoes of the Fiat Seicento

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Brake drums and shoes

Today, you will learn how to remove and replace the rear brake shoes of the Fiat Seicento in simple and quick steps. First, lift the vehicle and remove the rear wheel; then, remove the brake drum by unscrewing the screws and levering it off the sides, as shown in the video. At this point, disconnect the brake shoe spring by removing the clips to take out and replace the shoes with new ones (using original parts); clean the braking system of dirt and reassemble everything by applying the reverse procedure!

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the drums and brake shoes of the rear brakes on the Fiat Seicento.
How to replace the drums and brake shoes of the rear brakes on the Fiat Seicento.
Fiat Seicento (1998-2010 / MK 1) In this guide, we will discover the procedure for disassembling and replacing the drum and rear brake shoes of the Fiat Seicento. First, we raise the…
Replacing Drum Brakes on a Fiat Seicento
Replacing Drum Brakes on a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) This video will demonstrate how to replace the rear brakes on a Fiat Seicento. The first step is to lift the car with a jack so you can remove the wh…
How to Remove the Door Panel from a Fiat Seicento
How to Remove the Door Panel from a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before you can start, open the door of your Fiat Seicento. Begin by unscrewing and removing the screws that secure the door panel to the door itself.…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos