Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Drum Brakes on a Fiat Seicento

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake drums and shoes

Video tutorial

This video will demonstrate how to replace the rear brakes on a Fiat Seicento. The first step is to lift the car with a jack so you can remove the wheel and work on the brake.

Use a 12mm spanner to remove the fasteners and take off the drum. Unscrew the washer holding the hub to work more easily.

At this point, using force, remove the two brake shoes. After checking if the piston is functioning, refit the new shoes with the springs, ensuring they are tight and do not spring back.

Once the fasteners are replaced, proceed in reverse for reassembly.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight of a Fiat Seicento
How to Remove the Front Headlight of a Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Before starting, open the front bonnet of your Fiat Seicento. Begin by unscrewing and removing the bolts that secure the front headlight to the car. …
Replacing the Air Conditioning Compressor on Fiat 600
Replacing the Air Conditioning Compressor on Fiat 600
Fiat Seicento (1998-2010 / MK 1) How to replace the compressor on your Fiat 600? The Seicento is not originally equipped for air conditioning, so to fit just the compressor, you need…
How to Replace the Coolant in the Fiat Seicento
How to Replace the Coolant in the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) This brief and simple guide provides instructions for replacing the coolant or antifreeze in the Fiat Seicento. First, drain the old antifreeze by di…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos