Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in a Fiat Doblò?

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Headlight bulb

In this video, you will see how to replace the dipped beam bulbs in a Fiat Doblò, a very simple and quick operation. For this model, the bulbs must be H7. First, ensure the key is not in the ignition, then open the bonnet and unscrew the large cap located at the back of the headlamp. At this point, disconnect the connector and release the metal clip by pushing the ends inward, as shown in the video. Finally, fit the replacement bulb by following the reverse procedure and repeat the operation for the opposite headlamp if necessary.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Light Bulbs for Fiat Doblò
Replacing Rear Light Bulbs for Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this video tutorial, learn how to remove and replace the bulbs in the rear light of a second generation Fiat Doblò. First, open the boot door and …
Removing the Front Headlamp of a Fiat Doblò
Removing the Front Headlamp of a Fiat Doblò
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In today's tutorial video, you will learn how to remove and replace the front headlamp of a Fiat Doblò in simple steps. First, open the car's bonnet …
Replacement of the Fiat Doblò dashboard bulbs
Replacement of the Fiat Doblò dashboard bulbs
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today we will see the instructions that will allow us to disassemble and replace the bulbs on the dashboard, in particular those of the air condition…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos