Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Fiat Doblò dashboard bulbs

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Instrument panel light

Today we will see the instructions that will allow us to disassemble and replace the bulbs on the dashboard, in particular those of the air conditioning controls, of the Fiat Doblò. First of all, we get on board the cabin and start disassembling and removing the radio, disconnecting the electrical connectors on the back; then we unscrew the fixing screws to remove the entire plastic panel of the central instrumentation, as shown in the video. At this point, we remove and replace the small bulb bulbs of the air conditioning controls, applying the reverse process for reassembly!

Posted on 7 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Light Bulbs for Fiat Doblò
Replacing Rear Light Bulbs for Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this video tutorial, learn how to remove and replace the bulbs in the rear light of a second generation Fiat Doblò. First, open the boot door and …
Removing the Front Headlamp of a Fiat Doblò
Removing the Front Headlamp of a Fiat Doblò
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In today's tutorial video, you will learn how to remove and replace the front headlamp of a Fiat Doblò in simple steps. First, open the car's bonnet …
How to Replace the Dipped Beam Bulbs in a Fiat Doblò?
How to Replace the Dipped Beam Bulbs in a Fiat Doblò?
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In this video, you will see how to replace the dipped beam bulbs in a Fiat Doblò, a very simple and quick operation. For this model, the bulbs must b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos