Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Stilo
  6. : How do you reset the Fiat Stilo Service light?

Fiat Stilo - Video tutorial

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Checks and maintenance
Operation: How do you reset the Fiat Stilo Service light?

In order to reset the Service warning light on the Fiat Stilo, there is no procedure that can be carried out by scrolling through the menu on the instrument panel; the only way to reset the warning light is in fact to connect a diagnostic tool to the vehicle's OBD port, which is located under the steering column. Once the device has been connected, it will be necessary to select the car model in question and its version, following the reset operations shown in the video. After the operation it will be possible to disconnect the scanner checking that the light has been reset.


Posted on 11 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Stilo 2001-2010 - What does the warning light with a steering wheel and an exclamation point mean in the Fiat Stilo? Read Answer
    • Stilo 2001-2010 - How to open the fuel tank flap in the Fiat Stilo? Read Answer
    • Stilo 2001-2010 - What to do if the Fiat Stilo central locking does not work? Read Answer
    • Stilo 2001-2010 - How to remove the roof panel in the Fiat Stilo? Read Answer
    • Stilo 2001-2010 - How do you remove the washer tank of the Fiat Stilo? Read Answer
    • Stilo 2001-2010 - What is the tightening torque of the dual-mass flywheel of the Fiat Stilo 1.9 MultiJet engine? Read Answer
    • Stilo 2001-2010 - After how many km do I have to replace the timing belt on my Fiat Stilo? Read Answer
    • Stilo 2001-2010 - How much does the car radio fuse cost of a Fiat Stilo? Read Answer
    • Stilo 2001-2010 - How much does the air conditioning temperature sensor cost on a Fiat Stilo? Read Answer
    • Stilo 2001-2010 - What is the price of the transfer of ownership of a 115 hp Fiat Stilo? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos