Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Fiat Mobi remote control?

Model: Fiat Mobi MK 1 - Years 2016-2024
Part: Key

As we can see in this tutorial, replacing the Fiat Mobi remote control battery is a very simple and fast operation. To do this we will need a small flat-tip screwdriver and a spare CR2032 battery. Let's start by extending the emergency key using the large button depicting the Fiat logo, then unlock the drawer containing the battery by turning the relative screw clockwise. At this point we can proceed with the replacement of the same taking care to position the spare in the right direction. Finally, reinsert the drawer and tighten the screw.

Posted on 25 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Fiat Mobi coil
How to replace the Fiat Mobi coil
Fiat Mobi (2016-2024 / MK 1) Let's see the instructions in this guide that will allow us to disassemble and replace the ignition coil of the Fiat Mobi, following these simple ste…
How to replace the rear headlight bulbs of the Fiat Mobi
How to replace the rear headlight bulbs of the Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) The information provided in this guide will show us how to disassemble and replace the rear headlight bulbs of the Fiat Mobi. First, we open the rear…
What is the fuse scheme of the Fiat Mobi?
What is the fuse scheme of the Fiat Mobi?
Fiat Mobi (2016-2024 / MK 1) In this video we can see the diagram of the fuse box of the Fiat Mobi and the respective position, useful in case we need to check the fuse of a malf…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos