Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Front bumper

See other generations:
Video tutorial

In this mini guide dedicated to your Fiat Punto third series (2005-2018), we will discover the steps to quickly and safely remove the front bumper of the car. First, park the vehicle safely and switch it off completely. Next, lift the bonnet and unscrew the bolts located at the front using a suitable Torx spanner.

Then, do the same with the bolts located on both sides of the bumper and at the bottom. Finally, pull the bumper towards you until it is completely removed.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on a Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today’s video, see how to remove the front bumper on a Fiat Punto Evo and Grande Punto by following these simple steps. First, open and lift the b…
How to disassemble the front bumper of the Fiat Grande Punto
How to disassemble the front bumper of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will guide us through the process of disassembling and replacing the front bumper of the Fiat Grande Punto. First, we open the h…
Removing the Front Bumper on a Fiat Punto Evo
Removing the Front Bumper on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Remove the front bumper from the Fiat Punto Evo? Here’s how to take off the damaged bumper at the front. Lift the car on a jack to remove the screws …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos