Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from a Fiat Linea?

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Instrument cluster

Video tutorial

To remove the instrument cluster from a Fiat Linea, loosen the screws that secure the plastic covers around the instrument cluster. Once these covers are removed, you can access the screws underneath.

Remove these screws so that the instrument cluster can be pulled out of its housing. By disconnecting the connector at the back, you can completely remove it to connect the new replacement part.

The new part can now be inserted into its place, secured with the appropriate screws, and covered with the plastic covers.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Linea?
How to Reset the Service Light on a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To reset the Service light on a Fiat Linea, press and hold the accelerator pedal while the instrument cluster is off. Continue holding it down, then …
How to Set the Clock on the Fiat Linea?
How to Set the Clock on the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To set the clock on the Fiat Linea, turn on the instrument panel so you can navigate through the menu options on the onboard computer. Press the MENU…
How to Remove the Front Bumper of the Fiat Linea?
How to Remove the Front Bumper of the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To remove the front bumper of the Fiat Linea, loosen all the screws and rivets that secure it to the front of the vehicle: these screws will be acces…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos