Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Fiat Linea?

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

Video tutorial

To reset the Service light on a Fiat Linea, press and hold the accelerator pedal while the instrument cluster is off. Continue holding it down, then insert the ignition key and turn it to the on position to power up the instrument cluster. Once the instrument cluster is on, press the brake pedal all the way down seven times in a row. After completing this step, you will notice that the Service light has disappeared from the instrument cluster, which can then be turned off completely.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Fiat Linea?
How to Reset the Service Light on the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To clear the Service light displayed on the instrument cluster of the Fiat Linea, you will need a scan tool that must be connected to the vehicle's O…
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Fiat Linea (2007-2018 / MK 1) In this guide, we will see the main instructions on how to disassemble and replace the starter motor of the Fiat Linea 1.3 MultiJet. First, let's ope…
How to replace the gear knob of the Fiat Linea
How to replace the gear knob of the Fiat Linea
Fiat Linea (2007-2018 / MK 1) Replacing the gear knob of your Fiat Linea is undoubtedly one of the simplest operations that you can also perform independently and without any part…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos