Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Linea?

Model: Fiat Linea MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

Video tutorial

To clear the Service light displayed on the instrument cluster of the Fiat Linea, you will need a scan tool that must be connected to the vehicle's OBD port, located on the lower left side of the dashboard near the steering column. Once connected, select the car model and its corresponding version to start the reset procedure; at the end of the procedure, you can disconnect the scanner and then turn off and restart the display to verify that the light has been cleared.


Posted on 16 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Fiat Linea?
How to Reset the Service Light on a Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To reset the Service light on a Fiat Linea, press and hold the accelerator pedal while the instrument cluster is off. Continue holding it down, then …
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Replacement of the starter motor for the Fiat Linea 1.3 MultiJet
Fiat Linea (2007-2018 / MK 1) In this guide, we will see the main instructions on how to disassemble and replace the starter motor of the Fiat Linea 1.3 MultiJet. First, let's ope…
How to Set Up Bluetooth on the Fiat Linea?
How to Set Up Bluetooth on the Fiat Linea?
Fiat Linea (2007-2018 / MK 1) To connect your smartphone via Bluetooth to the Fiat Linea's radio, turn on the radio using the designated button after the instrument cluster is pow…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos