Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Bulbs on a Fiat Scudo

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Light bulb

In this video tutorial, you can see how to replace the heating bulbs on a Fiat Scudo. First, get inside the vehicle and engage the handbrake. Start by removing the trim located at the lower central part; use a lever tool for this. Once the trim is removed, you will find 4 Torx screws. After removing the screws, you need to unclip the mask by prying it sideways. This will give you access to the area below where the controls and knobs are located. There are two clips underneath that need to be unclipped; once done, you can detach the entire block. Now remove the part with the knobs by unfastening the side clips and two underneath. Once this part is removed, you will finally access the bulbs. Replace the old non-working bulbs with new ones and reassemble all parts in reverse order.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Heating Radiator on Fiat Scudo
How to Remove the Heating Radiator on Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Let's see how to remove the cabin heating radiator on a Fiat Scudo. First: remove the plastic covering of the centre tunnel (using appropriate plasti…
How to Replace the Front Headlight on the Fiat Scudo
How to Replace the Front Headlight on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Today, we will learn the procedure to remove and replace the front headlight and its bulbs on the Fiat Scudo. First, open the bonnet of your car and …
How to Remove the Headlight Bulbs on a Fiat Scudo
How to Remove the Headlight Bulbs on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Here’s how to remove the headlight bulbs on a Fiat Scudo: Open the front bonnet by pulling the lever located at the bottom right of the dashboard, an…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos