Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlight Bulbs on a Fiat Scudo

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Headlight bulb

Here’s how to remove the headlight bulbs on a Fiat Scudo: Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the inspection cap of the headlight (located at the rear of the headlight) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulbs using a screwdriver. Fit the new bulbs (same type and size) and insert the bulb holder back into the headlight housing. Reassemble all previously removed parts.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb of the Fiat Scudo
Replacing the Headlight Bulb of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) This guide briefly outlines the main instructions for removing and replacing the headlight bulb of the Fiat Scudo. First, open the bonnet of your car…
How to Replace the Front Headlamp Bulb on a Fiat Scudo
How to Replace the Front Headlamp Bulb on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) To replace the front headlamp bulb on a Fiat Scudo, open the bonnet and remove the protective cap located at the rear of the headlamp. This will allo…
How to Remove the Rear Light and Bulb on a Fiat Scudo
How to Remove the Rear Light and Bulb on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) In this video tutorial, you will find instructions on how to remove and replace the rear light and its bulbs on a second-generation Fiat Scudo. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos