Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on the Fiat Scudo

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Headlight

Today, we will learn the procedure to remove and replace the front headlight and its bulbs on the Fiat Scudo. First, open the bonnet of your car and start unscrewing the fixing screws located at the top of the bumper; remove the windscreen washer reservoir and take off the protective caps from the headlights to disconnect the electrical connectors of the bulbs, as shown in the video. At this point, remove the headlight unit and replace it with the new one; also replace any other bulbs if necessary, then reassemble everything!

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb of the Fiat Scudo
Replacing the Headlight Bulb of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) This guide briefly outlines the main instructions for removing and replacing the headlight bulb of the Fiat Scudo. First, open the bonnet of your car…
How to Replace the Front Headlamp Bulb on a Fiat Scudo
How to Replace the Front Headlamp Bulb on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) To replace the front headlamp bulb on a Fiat Scudo, open the bonnet and remove the protective cap located at the rear of the headlamp. This will allo…
How to Remove the Headlight Bulbs on a Fiat Scudo
How to Remove the Headlight Bulbs on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Here’s how to remove the headlight bulbs on a Fiat Scudo: Open the front bonnet by pulling the lever located at the bottom right of the dashboard, an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos