Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located in the Fiat Scudo?

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Dashboard

If you want to find the OBD port inside the cabin of your second series Fiat Scudo, just follow the guide below and apply the procedure described step by step. Fortunately, it is a very simple operation and within reach of anyone. First of all, you need to open the driver's side door and enter the vehicle. Then focus on the small compartment located next to the steering wheel and remove the small protective cover with your own hands. Immediately after removing the cover in question, locate the OBD port you were looking for and the procedure is successfully completed.

Posted on 14 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on Fiat Scudo
How to Replace the Pollen Filter on Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Does the cabin air filter need replacing? Here’s how to remove it from a Fiat Scudo. Lift the front bonnet, remove the plastic cover under the front …
Where is the Battery Located in the Fiat Scudo?
Where is the Battery Located in the Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) In this video, see where the battery is located in the Fiat Scudo and how to proceed if you need to replace it. As shown, it is not positioned in the…
Where is the Fuel Filter Located on the Fiat Scudo Van?
Where is the Fuel Filter Located on the Fiat Scudo Van?
Fiat Scudo (2007-2016 / MK 2) In this video, you can see where the fuel filter is located on the Fiat Scudo van and how to proceed if you need to replace it. As shown, it is locat…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos