Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator light on the Fiat Scudo 2

Model: Fiat Scudo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To manually reset the service light on your second series Fiat Scudo, all you need to do is follow the steps described in our new guide. First, you need to reach the driver's seat inside the vehicle, then insert the key and turn on the instrument panel.

Next, locate the two buttons located in the lower area of the panel and hold them down for about ten seconds. Finally, release both buttons and the manual reset procedure for the service light on your Fiat Scudo Mk2 is complete.


Posted on 7 February 2025 by ScegliAuto


Related tutorials

How to reset the service light on the 2007 Fiat Scudo
How to reset the service light on the 2007 Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) To reset the service light on the 2007 Fiat Scudo, follow these steps: - Get in the vehicle and close all doors; - Turn on the ignition; - Press the …
Resetting the Service Light on the Fiat Scudo
Resetting the Service Light on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) We will briefly show you the procedure necessary to reset the service light for the routine oil change on the Fiat Scudo. First, get into the vehicle…
How to Reset the Service Light on a Fiat Scudo?
How to Reset the Service Light on a Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) To reset the Service light on a Fiat Scudo, press and hold the button located on the right side of the instrument cluster while it is off. Continue h…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos