Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the seats in a Fiat Scudo

Model: Fiat Scudo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Seat

See other generations:
Video tutorial

In this video, the YouTuber shows how to change the seats of a first-generation Fiat Scudo with those from the next generation, which are much more comfortable and padded. After removing the seats to be changed, remember that it is not necessary to remove the slider; he did it just for demonstration (simply remove the three bolts holding the seat) and the seatbelt connector.

This is not a "plug & play" job. The seats need slight adaptation as, although very similar, the spaces are not exactly the same, so the task requires some skill, but it is nothing that cannot be done. Moreover, the result is worth all the effort.

You can find the seats from a breaker; a fair price is around £250 for the complete 3-seat bench.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Where are the Fuses on a Fiat Scudo?
Where are the Fuses on a Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) The fuses on a Fiat Scudo are located inside three fuse boxes installed in the vehicle. These boxes can be found low on the left side of the steering…
Resetting the Service Light on the Fiat Scudo
Resetting the Service Light on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) We will briefly show you the procedure necessary to reset the service light for the routine oil change on the Fiat Scudo. First, get into the vehicle…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos