Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light and Bulb on a Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In this video tutorial, you will find instructions on how to remove and replace the rear light and its bulbs on a second-generation Fiat Scudo. First, open the rear doors and using a socket spanner, unscrew the fixing screws of the rear light; then gently detach the unit and remove it, disconnecting the electrical connector of the bulbs.

At this point, you can detach the bulb holder from the light and access all the rear bulbs: replace them, if necessary, with new ones and reassemble everything, following the video to the end!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb of the Fiat Scudo
Replacing the Headlight Bulb of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) This guide briefly outlines the main instructions for removing and replacing the headlight bulb of the Fiat Scudo. First, open the bonnet of your car…
How to Replace the Front Headlamp Bulb on a Fiat Scudo
How to Replace the Front Headlamp Bulb on a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) To replace the front headlamp bulb on a Fiat Scudo, open the bonnet and remove the protective cap located at the rear of the headlamp. This will allo…
How to Remove the Headlight Bulbs on a Fiat Scudo
How to Remove the Headlight Bulbs on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Here’s how to remove the headlight bulbs on a Fiat Scudo: Open the front bonnet by pulling the lever located at the bottom right of the dashboard, an…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos