Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Scudo
    4. : Tail light

Fiat Scudo - Tail light

Tail Light Fiat Scudo (2007-2016 / mk 2)

Fiat Scudo (2007-2016 / MK 2)
How to Dismantle the Rear Light and Replace the Bulbs on the Fiat Scudo
The following instructions will show you how to dismantle and replace the rear light and its bulbs on the Fiat Scudo. First, open the rear doors and start …Read all…
Posted on 1 February 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
How to Remove the Rear Light and Bulb on a Fiat Scudo
In this video tutorial, you will find instructions on how to remove and replace the rear light and its bulbs on a second-generation Fiat Scudo. First, open the …Read all…
Posted on 22 June 2026 by ScegliAuto
Airbag (1) Alternator (1) Car stereo (1) Battery (2) Transmission (1) Body (3) Key (1) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Dashboard (1) Headlight (1) Tail light (2) Air filter (3) Cabin air filter (8) Diesel fuel filter (3) Light bulb (3) Headlight bulb (2) License plate light (1) Handle (2) Starter motor (1) Transmission fluid (1) Engine oil (1) Clock (9) Door trim panel (7) Brake pads (1) Heater core (1) Fuse box (8) Seat (1) Door lock (1) Side mirror (2) Warning light – error code (4) Service warning light (29) EGR valve (2) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos