Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Scudo
    4. : Body

Fiat Scudo - Body

Body Fiat Scudo (2007-2016 / mk 2)

Fiat Scudo (2007-2016 / MK 2)
How to convert a Fiat Scudo from a van to a camper?
Born from the need to have a more comfortable vehicle on certain occasions, considering the idea proposed in this video guide is not at all wrong. Essentially, …Read all…
Posted on 8 December 2025 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
How to Open the Bonnet of a Fiat Scudo
Below are the steps that will allow you to open the bonnet of a Fiat Scudo, following the instructions provided. First, open the front door on the driver's …Read all…
Posted on 20 September 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
How to Open the Bonnet on Fiat Scudo MK2 (2008)
In this video, see how to open the bonnet on the second generation Fiat Scudo by following these simple and quick steps. First, open the front door and pull …Read all…
Posted on 13 June 2026 by ScegliAuto
Airbag (1) Alternator (1) Car stereo (1) Battery (2) Transmission (1) Body (3) Key (1) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Dashboard (1) Headlight (1) Tail light (2) Air filter (3) Cabin air filter (8) Diesel fuel filter (3) Light bulb (3) Headlight bulb (2) License plate light (1) Handle (2) Starter motor (1) Transmission fluid (1) Engine oil (1) Clock (9) Door trim panel (7) Brake pads (1) Heater core (1) Fuse box (8) Seat (1) Door lock (1) Side mirror (2) Warning light – error code (4) (1) Service warning light (29) EGR valve (2) Blower motor (2)

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos