Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of a Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Body

See other generations:
Video tutorial

Below are the steps that will allow you to open the bonnet of a Fiat Scudo, following the instructions provided. First, open the front door on the driver's side and start pulling the lever located at the bottom next to the seat, releasing the bonnet lock; then move to the front of the vehicle and release the lock found between the bonnet and the front bumper grille, as shown in the video.

At this point, lower the bonnet to close it, applying some pressure or letting it drop from a certain height.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet on Fiat Scudo MK2 (2008)
How to Open the Bonnet on Fiat Scudo MK2 (2008)
Fiat Scudo (2007-2016 / MK 2) In this video, see how to open the bonnet on the second generation Fiat Scudo by following these simple and quick steps. First, open the front door a…
How to Replace the Diesel Filter on a Fiat Scudo?
How to Replace the Diesel Filter on a Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) To replace the diesel filter on a Fiat Scudo, open the bonnet to access the components in the engine bay. On the right side, you will find the diesel…
Replacing the Headlight Bulb of the Fiat Scudo
Replacing the Headlight Bulb of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) This guide briefly outlines the main instructions for removing and replacing the headlight bulb of the Fiat Scudo. First, open the bonnet of your car…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos