Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Scudo
    4. : Handle

Fiat Scudo - Handle

Handle Fiat Scudo (2007-2016 / mk 2)

Fiat Scudo (2007-2016 / MK 2)
How to Replace the Sliding Door Handle on the Fiat Scudo
To remove the sliding door handle on the Fiat Scudo, open the door to access the hole located on its side. Inside this hole, there will be a screw that needs …Read all…
Posted on 20 September 2026 by ScegliAuto
Fiat Scudo (1996-2007 / MK 1)
How to Remove Left Handle of Fiat Scudo
How to remove the left door handle? Here’s how to remove the handle from the Fiat Ducato. Remove the door cover panel to access the back of the handle. …Read all…
Posted on 30 April 2026 by ScegliAuto

Handle Fiat Scudo (1996-2007 / mk 1)

Fiat Scudo (2007-2016 / MK 2)
How to Replace the Sliding Door Handle on the Fiat Scudo
To remove the sliding door handle on the Fiat Scudo, open the door to access the hole located on its side. Inside this hole, there will be a screw that needs …Read all…
Posted on 20 September 2026 by ScegliAuto
Fiat Scudo (1996-2007 / MK 1)
How to Remove Left Handle of Fiat Scudo
How to remove the left door handle? Here’s how to remove the handle from the Fiat Ducato. Remove the door cover panel to access the back of the handle. …Read all…
Posted on 30 April 2026 by ScegliAuto
Airbag (1) Alternator (1) Car stereo (1) Battery (2) Transmission (1) Body (3) Key (1) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Dashboard (1) Headlight (1) Tail light (2) Air filter (3) Cabin air filter (8) Diesel fuel filter (3) Light bulb (3) Headlight bulb (2) License plate light (1) Handle (2) Starter motor (1) Transmission fluid (1) Engine oil (1) Clock (9) Door trim panel (7) Brake pads (1) Heater core (1) Fuse box (8) Seat (1) Door lock (1) Side mirror (2) Warning light – error code (4) (1) Service warning light (29) EGR valve (2) Blower motor (2)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos