Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sliding Door Handle on the Fiat Scudo

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Handle

To remove the sliding door handle on the Fiat Scudo, open the door to access the hole located on its side. Inside this hole, there will be a screw that needs to be loosened. By doing this, you can slide out the lock cylinder corresponding to the handle: once the cylinder is removed, you can also take out the handle from its housing, allowing you to insert the new replacement part. After the replacement, refit the cylinder and check that everything works.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Left Handle of Fiat Scudo
How to Remove Left Handle of Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) How to remove the left door handle? Here’s how to remove the handle from the Fiat Ducato. Remove the door cover panel to access the back of the handl…
Removing the Sliding Door Inner Panel on Fiat Scudo
Removing the Sliding Door Inner Panel on Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) In this video, you will learn how to remove the sliding door panel of a Fiat Scudo. First, remove the door handle; simply use a flathead screwdriver …
Removing Door Panel on Fiat Scudo
Removing Door Panel on Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Today, we will see in this video tutorial how to remove the door panel of a Fiat Scudo. First, open the front door and remove the plastic covers of t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos