Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Sliding Door Inner Panel on Fiat Scudo

Model: Fiat Scudo MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

In this video, you will learn how to remove the sliding door panel of a Fiat Scudo. First, remove the door handle; simply use a flathead screwdriver and gently pry it off. Remove the frame of the door opening handle using the same procedure.

Then, unclip the plastic cover from the upper pillar. Once these operations are completed, you will have created the necessary space to access all the Torx screws to remove the panel, located at the sides of the door.

Don't forget to remove the two screws securing the handle with a socket wrench.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Sliding Door Handle on the Fiat Scudo
How to Replace the Sliding Door Handle on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) To remove the sliding door handle on the Fiat Scudo, open the door to access the hole located on its side. Inside this hole, there will be a screw th…
Removing the Right Front Door Panel of a Fiat Scudo
Removing the Right Front Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Remove the right front door panel of a Fiat Scudo. Use a screwdriver to remove the trim in the area of the upper door release lever and the screws in…
How to Remove the Door Panel of a Fiat Scudo
How to Remove the Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Before you begin, open the door of your Fiat Scudo. Start by unfastening and removing the inserts and covers of the door panel using a flathead screw…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos