Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Left Handle of Fiat Scudo

Model: Fiat Scudo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Handle

See other generations:
Video tutorial

How to remove the left door handle? Here’s how to remove the handle from the Fiat Ducato. Remove the door cover panel to access the back of the handle.

Detach the plastic trim from the door, then use a screwdriver to undo the securing screws at the back of the outer handle. Finally, remove the handle from inside the door by hand.

Take the new part and compare it with the one previously removed. Install the handle inside the door with all the attached parts.

Test the correct operation of the handle after installation. Reattach the cover panel to finish.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Fiat Scudo
How to Remove the Door Panel on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) How do you remove the door panel on a Fiat Scudo? In this video, see how to proceed. Before starting the disassembly, disconnect the battery terminal…
Instructions for Removing the Lock from a Fiat Scudo
Instructions for Removing the Lock from a Fiat Scudo
Fiat Scudo (1996-2007 / MK 1) Let’s see how to remove the rear door lock on a first-generation Fiat Scudo by following these simple instructions. First, open the rear door and rem…
How to replace the cabin air filter of the Fiat Scudo
How to replace the cabin air filter of the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) If you want to independently replace the air filter located in the cabin of your Fiat Scudo, you just need to read the following guide and put into p…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos