Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Lock from a Fiat Scudo

Model: Fiat Scudo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door lock

See other generations:
Video tutorial

Let’s see how to remove the rear door lock on a first-generation Fiat Scudo by following these simple instructions. First, open the rear door and remove its plastic panel; to do this, unscrew the side screws of the panel using a screwdriver and unclip it from the sides.

Then unscrew the Torx screws of the lock found inside the holes, as well as the side screws; next, remove the handle from the outside and also disconnect the lock cable. Finally, remove the mechanism as shown in the video!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of a Fiat Scudo
How to Open the Bonnet of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Below are the steps that will allow you to open the bonnet of a Fiat Scudo, following the instructions provided. First, open the front door on the dr…
Instructions for Removing the Cabin Fan of a Fiat Scudo
Instructions for Removing the Cabin Fan of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Today, you will learn how to remove the cabin fan of a second-generation Fiat Scudo by following the main instructions below. First, get inside the v…
How to Replace the Sliding Door Handle on the Fiat Scudo
How to Replace the Sliding Door Handle on the Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) To remove the sliding door handle on the Fiat Scudo, open the door to access the hole located on its side. Inside this hole, there will be a screw th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos