Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Fiat Scudo

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Door trim panel

How do you remove the door panel on a Fiat Scudo? In this video, see how to proceed. Before starting the disassembly, disconnect the battery terminals located in the boot. Begin disassembly by removing the handle on the panel using a lever. Use a screwdriver to unscrew the securing screws located in the plastic handle. Once all screws are removed, use the lever to detach all the plastic clips securing the door. Pull the door panel off with your hands, disconnect any power connectors and release cables.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Right Front Door Panel of a Fiat Scudo
Removing the Right Front Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Remove the right front door panel of a Fiat Scudo. Use a screwdriver to remove the trim in the area of the upper door release lever and the screws in…
Removing the Window Regulator Motor from a Fiat Scudo Door
Removing the Window Regulator Motor from a Fiat Scudo Door
Fiat Scudo (2007-2016 / MK 2) Is the window regulator not working on your Fiat Scudo? Remove the door panel to access the window regulator. Disconnect the battery terminals for sa…
How to Remove the Rear Light and Bulb on a Fiat Scudo
How to Remove the Rear Light and Bulb on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) In this video tutorial, you will find instructions on how to remove and replace the rear light and its bulbs on a second-generation Fiat Scudo. First…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos