Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Window Regulator Motor from a Fiat Scudo Door

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Door trim panel

Is the window regulator not working on your Fiat Scudo? Remove the door panel to access the window regulator. Disconnect the battery terminals for safety. Remove the door panel, disconnect the window and speaker connectors, peel back the adhesive cover (metal) from the door, unscrew the screws around the window regulator motor with a screwdriver, and disconnect the electrical connectors supplying power to it. Replace the window regulator motor with a new one of the same size and model. Reassemble everything by reversing the disassembly steps.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Right Front Door Panel of a Fiat Scudo
Removing the Right Front Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Remove the right front door panel of a Fiat Scudo. Use a screwdriver to remove the trim in the area of the upper door release lever and the screws in…
How to Remove the Door Panel of a Fiat Scudo
How to Remove the Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Before you begin, open the door of your Fiat Scudo. Start by unfastening and removing the inserts and covers of the door panel using a flathead screw…
How to Replace the Starter Motor on a Fiat Scudo?
How to Replace the Starter Motor on a Fiat Scudo?
Fiat Scudo (2007-2016 / MK 2) To replace the starter motor on a Fiat Scudo, first disconnect the vehicle's battery: it is located under the protective panel beneath the front pass…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos