Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Right Front Door Panel of a Fiat Scudo

Model: Fiat Scudo MK 2 - Years 2007-2016
Part: Door trim panel

Remove the right front door panel of a Fiat Scudo. Use a screwdriver to remove the trim in the area of the upper door release lever and the screws in the handle (after removing the plastic cover). Remove the trim at the corner of the window, unscrew the remaining screws on the door panel, and detach the retaining clips. Pull the panel away with your hands and disconnect it from the door (disconnect the wiring harness and the release cable). Refit everything by reversing the disassembly steps.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Fiat Scudo
How to Remove the Door Panel of a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) Before you begin, open the door of your Fiat Scudo. Start by unfastening and removing the inserts and covers of the door panel using a flathead screw…
Removing the Window Regulator Motor from a Fiat Scudo Door
Removing the Window Regulator Motor from a Fiat Scudo Door
Fiat Scudo (2007-2016 / MK 2) Is the window regulator not working on your Fiat Scudo? Remove the door panel to access the window regulator. Disconnect the battery terminals for sa…
How to Remove the Door Panel on a Fiat Scudo
How to Remove the Door Panel on a Fiat Scudo
Fiat Scudo (2007-2016 / MK 2) How do you remove the door panel on a Fiat Scudo? In this video, see how to proceed. Before starting the disassembly, disconnect the battery terminal…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos