Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Scudo
  6. : Diesel fuel filter

Fiat Scudo - Diesel fuel filter

Diesel Fuel Filter Fiat Scudo (2007-2016 / mk 2)

Fiat Scudo (2007-2016 / MK 2)
How to Replace the Diesel Filter on a Fiat Scudo?

To replace the diesel filter on a Fiat Scudo, open the bonnet to access the components in the engine bay. On the right side, you will find the diesel filter …Read all…
Posted on 25 August 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
Where is the Fuel Filter Located on the Fiat Scudo Van?

In this video, you can see where the fuel filter is located on the Fiat Scudo van and how to proceed if you need to replace it. As shown, it is located inside …Read all…
Posted on 12 September 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
Replacing the Diesel Filter on Fiat Scudo

Want to perform maintenance on your Fiat Scudo without incurring extra costs? Here’s how to replace the diesel filter yourself. First, lift the bonnet and …Read all…
Posted on 29 March 2026 by ScegliAuto

Airbag (1) Alternator (1) Car stereo (1) Battery (2) Transmission (1) Body (3) Key (1) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Dashboard (1) Headlight (1) Tail light (2) Air filter (3) Cabin air filter (8) Diesel fuel filter (3) Light bulb (3) Headlight bulb (2) License plate light (1) Handle (2) Starter motor (1) Transmission fluid (1) Engine oil (1) Clock (9) Door trim panel (7) Brake pads (1) Heater core (1) Fuse box (8) Seat (1) Door lock (1) Side mirror (2) Warning light – error code (4) Service warning light (29) EGR valve (2) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos