Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Scudo
    4. : Blower motor

Fiat Scudo - Blower motor

Blower Motor Fiat Scudo (2007-2016 / mk 2)

Fiat Scudo (1996-2007 / MK 1)
Guide to Replace the Cabin Fan Resistor on the Fiat Scudo (2005)
In today's video tutorial, you will see how to remove and replace the air conditioning and cabin fan resistor on the 2005 Fiat Scudo, following the …Read all…
Posted on 2 June 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
Instructions for Removing the Cabin Fan of a Fiat Scudo
Today, you will learn how to remove the cabin fan of a second-generation Fiat Scudo by following the main instructions below. First, get inside the vehicle and …Read all…
Posted on 1 May 2026 by ScegliAuto

Blower Motor Fiat Scudo (1996-2007 / mk 1)

Fiat Scudo (1996-2007 / MK 1)
Guide to Replace the Cabin Fan Resistor on the Fiat Scudo (2005)
In today's video tutorial, you will see how to remove and replace the air conditioning and cabin fan resistor on the 2005 Fiat Scudo, following the …Read all…
Posted on 2 June 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
Instructions for Removing the Cabin Fan of a Fiat Scudo
Today, you will learn how to remove the cabin fan of a second-generation Fiat Scudo by following the main instructions below. First, get inside the vehicle and …Read all…
Posted on 1 May 2026 by ScegliAuto
Airbag (1) Alternator (1) Car stereo (1) Battery (2) Transmission (1) Body (3) Key (1) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Dashboard (1) Headlight (1) Tail light (2) Air filter (3) Cabin air filter (8) Diesel fuel filter (3) Light bulb (3) Headlight bulb (2) License plate light (1) Handle (2) Starter motor (1) Transmission fluid (1) Engine oil (1) Clock (9) Door trim panel (7) Brake pads (1) Heater core (1) Fuse box (8) Seat (1) Door lock (1) Side mirror (2) Warning light – error code (4) (1) Service warning light (29) EGR valve (2) Blower motor (2)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos