Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Scudo
    4. : Air filter

Fiat Scudo - Air filter

Air Filter Fiat Scudo (2007-2016 / mk 2)

Fiat Scudo (2007-2016 / MK 2)
How to change the air filter on the Fiat Scudo
In this video we can see how to change the air filter on the Fiat Scudo: we open the hood of the vehicle and remove the plastic cap covering the air filter: to …Read all…
Posted on 9 June 2025 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
How to Replace the Air Filter on a Fiat Scudo
Learn how to replace the engine air filter on a Fiat Scudo. Open the car door, pull up the lever to open the engine compartment located at the bottom left of …Read all…
Posted on 4 April 2026 by ScegliAuto
Fiat Scudo (2007-2016 / MK 2)
How to Replace the Cabin Air Filter in Your Car
The procedure for replacing the air filter is very simple. By following this guide, you will be able to carry out this procedure independently each time …Read all…
Posted on 4 March 2026 by ScegliAuto
Airbag (1) Alternator (1) Car stereo (1) Battery (2) Transmission (1) Body (3) Key (1) Timing belt (1) V-belt (1) A/C controls (1) Onboard computer (1) Checks and maintenance (1) Dashboard (1) Headlight (1) Tail light (2) Air filter (3) Cabin air filter (8) Diesel fuel filter (3) Light bulb (3) Headlight bulb (2) License plate light (1) Handle (2) Starter motor (1) Transmission fluid (1) Engine oil (1) Clock (9) Door trim panel (7) Brake pads (1) Heater core (1) Fuse box (8) Seat (1) Door lock (1) Side mirror (2) Warning light – error code (4) (1) Service warning light (29) EGR valve (2) Blower motor (2)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos